ashtech HDS800, Reference Manual

Page: 208 / 678

192
Web Server Help Files Collection
Advanced Setup (Configuration Tab)
Advanced Setup (Configuration Tab)
Terminal Window
This section is used to communicate with the receiver
through $PASH commands. The purpose and syntax of each
available $PASH command is described in detail elsewhere
in this manual.
To send a command to the receiver, type your command in the
Command
field and then click on the
Send
button. In the pane
underneath the
Command
field, you will see your command
duplicated in blue characters followed by the response line,
in orange characters, returned after a while by the receiver.
The commands you type and send are all stacked up into the
Command
field so it is easy for you to re-select and re-send
one of those when needed.
Use the
Clear View
button to clear out the page.
If alarms have been set in the receiver, you may click on the
Acknowledge Alarms
button to acknowledge all these alarms.
As a result, the $PASHS,WAK command is issued to perform
this operation in the receiver.
Software Update
This page allows you to upgrade the firmware of the receiver
if a new version is available from the specified FTP server.