ashtech HDS800, Reference Manual

Page: 380 / 678

364
Set Command Library
PRT: Setting Baud Rates
Function
This command is used to set the baud rate of any of the serial
ports used in the receiver (except port C).
Command Format
Syntax
$PASHS,PRT,c1,d2[*cc]
Parameters
Port A can operate in RS422 mode up to 1 428 571 Bd with
any particular precaution. For higher speeds, shorter
connections should be used. This is also true for all RS232
ports (A, B and F) for speeds higher than 115 200 Bd.
Example
Setting port A to 19200 Bd:
$PASHS,PRT,A,6
Relevant Query
Command
$PASHQ,PRT
See also
$PASHS,CTS
$PASHS,MDP
Parameter Description Range
c1 Port ID A, B, D, F
d2 Baud rate 0-15 (see table below)
*cc Optional checksum *00-*FF
Code Baud Rate
Code
Baud Rate
0 300 7 38400
1 600 8 57600
2 1200 9 115200
3 2400 10 230400
4 4800 11 480600
5 9600 12 921600
6 19200 13 1428571