ashtech HDS800, Reference Manual

Page: 318 / 678

302
Set Command Library
Parameters
Comments
Optional fields s3 and s4 need to be specified when the base
used requires a user name and password. In this case, the
receiver sends the $GPUID,s2,s4 command to the base right
after the IP connection has been established.
Examples
Connecting the receiver to IP address 134.20.2.100 and port
number 6666:
$PASHS,DIP,RIP,134.20.2.100,PRT,6666*2C
Connecting the receiver to www.MyRec.com through port
2100:
$PASHS,DIP,RIP,www.MyRec.com,PRT,2100*60
Relevant Query
Commands
$PASHQ,MDM
$PASHQ,DIP
$PASHQ,ETH
See also
$PASHS,MDM,...
$PASHS,DIP,ON
$PASHS,DIP,OFF
$PASHS,ETH,...
DIP,OFF: Terminating Direct IP Connection
Function
This command is used to terminate the current IP connection
to a server.
Parameter Description Range
RIP,s1 IP address (xxx.xxx.xxx.xxx) or host name 32 char. max.
PRT,d2 Port number 0-65535
LGN,s3 User name (optional) 32 char. max.
PWD,s4 Password (optional) 32 char. max.
IPP,c5
Internet port used on the receiver to estab-
lish the connection with the base (server):
• E: Internal modem (default)
• P: Ethernet stream 1
• Q: Ethernet stream 2
E, P, Q
*cc Optional checksum *00-*FF