PUSH
Ex.
Ex.
- 1 -
English
Quick Reference Guide
Preparing the remote control
Accessories
■
Items necessary for connection
■
The following accessories are supplied with this product.
Speakers
External components
Remote control
Front speaker
Ex.
Ex.
Batteries (2) (AAA, R03, UM-4)
Center speaker
AM loop antenna
Surround speaker and
Surround back speaker
Indoor FM antenna*
VIDEO AUX input cover
Active subwoofer
3
1
2
3
YPAO microphone
within 6 m
(20 ft)
1
Take off the battery compartment cover.
2
Insert the two supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
Be sure to aim the remote control directly at the
remote control sensor on this unit during operation.
TV
Cable
Cables for connecting external components
•
(may differ depending on the components you are connecting)
Speaker cables
•
(a quantity to match the number of speakers you are connecting)
Audio pin cable
•
(for subwoofer)
Playback device such as BD
(Blu-ray Disc)/DVD players
Use speakers with an impedance of at least 6 Ω.
•
If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
•
Prepare at least two speakers (for front). The priority of the other speakers is as follows:
•
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)
* The confi guration of the supplied FM antenna will differ depending on
the country or region where the unit is being used.
Some features are not available in certain regions.
HTR_5063_EN.indd 1
2010/2/4 9:28:23