Anritsu BERTWave Series, Operation Manual, Page: 42 / 466

Chapter 1 Outline
1-16
1.3 Features
The MP2110A has the following features:
 Bit error rate measurement and waveform monitoring up to 28.2 Gbit/s
 Bit error rate measurement and waveform monitoring in one
instrument
 4-channel simultaneous BER measurement, handy for CFP4 module
and QSFP module testing (MP2110A-014)
 Accurate waveform monitoring using low residual jitter of 200 fs and
rms (typical value) (MP2110A-024)
 For sampling oscilloscope:
EYE analysis in short time using high-speed sampling
 Compatibility of remote commands with previous Anritsu measuring
instruments
 One or both of the following clock recovery units can be installed to the
sampling oscilloscope:
 MP2110A-054: 25.5 to 28.2 Gbaud
 MP2110A-055: 25.5 to 28.9 and 51.0 to 58.0 Gbaud
 MP2110A-095 for PAM4 (Pulse Amplitude Modulation) waveform
analysis
 MP2110A-096 for jitter analysis from the waveform obtained by
Sampling Oscilloscope