Anritsu BERTWave Series, Operation Manual, Page: 29 / 466

1.1 Introduction of BERTWave
1-3
1
Outline
1.1.1 MP2110A BERTWave
MP2110A BERTWave (MP2110A) is a measuring instrument combining
the BERT (Bit Error Rate Tester) and the sampling oscilloscope. It is used
by connecting with the monitor, key board, and mouse as the same as PC.
It is controlled remotely using Ethernet or GPIB (General Purpose
Interface Bus).
Figure 1.1.1-1 MP2110A External View
MP2110A is a measuring instrument that evaluates the electronic devices
such as 100G bit Ethernet (100GbE), OTU4, 32G Fiber Channel (32GFC).
It performs the bit error rate test and waveform observation for the
signals of bit rate “24.3 to 28.2 Gbit/s” used in the communication
standards.
The bit error rate test and wave form observation for the signals of bit
rate “10 Gbit/s” can be performed by installing the MP2110A-093 PPG/ED
Bit Rate expansion.
By installing the MP2110A-095 PAM4 Analysis Software, MP2110A can
monitor waveforms of PAM4 signals used by electronic devices, for
example, 200GbE, 400GbE and 64GFC.