Anritsu BERTWave Series, Operation Manual, Page: 394 / 466

Chapter 8 Maintenance
8-28
8.8 Calibration
Regular maintenance such as periodic inspections and calibration is
essential for the MP2110A for long-term stable performance. Regular
inspection and calibration are recommended for using the MP2110A in its
prime condition at all times. The recommended calibration cycle after
delivery of the MP2110A is twelve months.
If you require support after delivery, contact an Anritsu Service and Sales
office. Contact information can be found on the last page of the printed
version of this manual, and is available in a separate file on the PDF
version.
We may not provide calibration or repair if any of the following cases
apply.
 Seven or more years have elapsed after production and parts for the
instrument are difficult to obtain, or it is determined that reliability
cannot be maintained after calibration/repair due to significant wear.
 Circuit changes, repair, or modifications are done without our
approval.
 It is determined that the repair cost would be higher than the price of a
new item.