Amada ML-2350A-CE, Operation Manual, Page: 98 / 235

98
ML-2350A/2351A
1. Setting Welding Schedules
Switching the Accuracy of the Measured Laser
Energy Value (J) (MEMORY SWITCH Screen)
In the following, the method of switching the measurement accuracy of the
laser energy value (J) by displaying the MEMORY SWITCH screen from the
INITIALIZE screen is explained.
Usually, this setting permits switching the measured value of 0.1 J increments
over to 0.01 J increments, so that more minute welding work can be performed.
1
Displaying the MEMORY SWITCH Screen
(1) Turn OFF the CONTROL keyswitch and turn ON the MAIN POWER switch.
Power is supplied and the POWER lamp comes on. The screen of model name
appears.
(2) While the model name screen is displayed (for about 3 seconds), press the
corners of the touch panel display in the order shown in the figure above.
The INITIALIZE screen appears.
⇒ Unless the CONTROL keyswitch is OFF, the INITIALIZE screen is not displayed.
① ③
④ ②