Amada ML-2350A-CE, Operation Manual, Page: 196 / 235

196
ML-2350A/2351A
3. Maintenance of Laser Oscillator Section
(4) Loosen the bolts of both ends of the flashlamp. Hold both ends of the flowtube
(glass tube) with both hands and lift it up together with the flashlamp.
⇒
When removing the flashlamp, you can see the net in the laser chamber. Check
this mesh portion and remove dust or glass fragments with tweezers if any.
(5) Put the flashlamp on a clean cloth and remove the bolts on both ends. Then, pull
out the flashlamp slowly from the flowtube.
⇒
Put the removed top lid, reflector, and other parts of the laser chamber on a clean
cloth without allowing oil and dust to sticking on them.
<Notes>
- Handle the laser chamber with extreme care to void attaching a flaw or dust
onto the mirror face inside the reflector. Such a flaw or dust will reduce the
laser output.
- Do not touch the glass portion of the flashlamp and glass portion of the flowtube
directly with a hand or do not blemish it. The flashlamp will be damaged. Before
installing the flashlamp, clean the glass portion of the lamp by using alcohol.
Laser chamber top lid
Status viewed from the side face of the main unit
Reflector (Top portion)
Flashlamp Flowtube
Mesh portion