Amada ML-2350A-CE, Operation Manual, Page: 163 / 235

4. Commands
163
ML-2350A/2351A
Chapter 5 Laser W
elding by External Communication Control (RS-485 CONTROL)
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
Data No. Item Data Range
10 [POINT 20] TIME on the [SCHEDULE] screen 000 – 300 (×0.1ms/x0.01ms)
11*
[REFERENCE VALUE] on the [SCHEDULE] screen
Approximate laser output energy of the set waveform 0000 – 9999 (×0.1J)
88 Schedule Settings for FLEX ― POWER 01 to 10
Data No. Item Data Range
01 [POINT 01] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
02 [POINT 02] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
03 [POINT 03] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
04 [POINT 04] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
05 [POINT 05] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
06 [POINT 06] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
07 [POINT 07] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
08 [POINT 08] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
09 [POINT 09] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
10 [POINT 10] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
11*
[REFERENCE VALUE] on the [SCHEDULE] screen
Approximate laser output energy of the set waveform
0000 – 9999 (×0.1J)
89 Schedule Settings for FLEX ― POWER 11 to 20
Data No. Item Data Range
01 [POINT 11] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
02 [POINT 12] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
03 [POINT 13] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
04 [POINT 14] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
05 [POINT 15] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
06 [POINT 16] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
07 [POINT 17] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
08 [POINT 18] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
09 [POINT 19] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
10 [POINT 20] POWER on the [SCHEDULE] screen 0000 – 2000 (×0.1%)
11*
[REFERENCE VALUE] on the [SCHEDULE] screen
Approximate laser output energy of the set waveform
0000 – 9999 (×0.1J)
⇒
Data No.11 is set to the same value for 86, 87, 88, and 89.
75 SEAM setting value SEAM ON/OFF
Data No. Item Data Range
01
[SEAM] on the [SCHEDULE] screen
Fade function ON/OFF 0: OFF 1: ON
0 − 1