Amada ML-2350A-CE, Operation Manual, Page: 160 / 235

160
ML-2350A/2351A
4. Commands
Reading Data
The command (code: R) to read the set values and monitor values of welding
schedules by specifying equipment No. and schedule No. is explained below.
CH1/CH0 Equipment No. (CH1 = tens digit, CH0 = units digit)
LA1/LA0
Classification No. of the setting (LA1 = tens digit, LA0 = units digit)
99 Settings for the cooler (Set the schedule No. [SH1/SH0] to 00.)
84 Schedule settings for both FIX and FLEX
85 Schedule settings for FIX
86 Schedule settings for FLEX, TIME 01 to 10
87 Schedule settings for FLEX, TIME 11 to 20
88 Schedule settings for FLEX, POWER 01 to 10
89 Schedule settings for FLEX, POWER 11 to 20
75 SEAM setting value SEAM ON/OFF
76 SEAM setting value SHOT 01 to 10
77 SEAM setting value SHOT 11 to 20
78 SEAM setting value POWER 01 to 10
79 SEAM setting value POWER 11 to 20
95 Laser power monitor — Shot count, Good count, average
00 Laser power monitor — Energy, number of waveform data, etc.
01 Laser power monitor — Waveform data 000 to 004
: :
22 Laser power monitor — Waveform data 105 to 109
SH1/SH0
Schedule No. (SH1 = tens digit, SH0 = units digit)
Enter the No. of the schedule you want to read within the data range of 00 to
31.
If □□ (spaces) are entered, the currently selected schedule is used.
DT1/DT0
Data No. (DT1 = tens digit, DT0 = units digit)
• For detailed information on the data No., see "Set Value/Monitor Value
Table" on page 161.
• If “99” is entered, data is read in a batch.
data: (Data No.1), (Data No.2), (Data No.3), ... (the last Data No.)
Insert [,] between individual data.
ACK or NAK
The Laser returns a [NAK] if the classification No., schedule No., or data No.
falls outside the specified range.