Amada ML-2350A-CE, Operation Manual, Page: 156 / 235

156
ML-2350A/2351A
3. Initial Settings
1
Displaying the INITIALIZE Screen
(1) Turn OFF the CONTROL keyswitch and turn ON the MAIN POWER switch.
Power is supplied and the POWER lamp comes on. The screen of model name
appears.
(2) While the model name screen is displayed (for about 3 seconds), press the
corners of the touch panel display in the order shown in the figure above.
The INITIALIZE screen appears.
⇒
Unless the CONTROL keyswitch is OFF, the INITIALIZE screen does not appear.
2
Specifying Equipment No.
(1) Press the "NETWORK#" setting button.
Enter the laser welder No. in the range of 00 to 15.
⇒
For details of each item on the INITIALIZE screen, refer to Chapter 2 "1. Setting
Welding Schedules" on page 73.
① ③
④ ②