Amada ML-2350A-CE, Operation Manual, Page: 111 / 235

2. Setting the Laser Light Delivery
111
ML-2350A/2351A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Operating an Optional Branch Shutter and Timesharing Unit
(1) After putting the branch shutter under independent control, press the MEMORY
SWITCH button on the INITIALIZE screen.
The MEMORY SWITCH screen is displayed.
(2) Press the setting buttons of "1" to "6" of "SWITCH 4" to set the branch shutter
No. to be operated to ON.
"1" to "6" of "SWITCH 4" are associated with branch shutters 1 to 6. Accordingly,
set them to ON within the number of mounted branch shutters.
(3) Press the setting buttons of "1" to "5" of "SWITCH 5" to set the timesharing unit
numbers to be operated to ON.
"1" to "5" of "SWITCH 5" are associated with the timesharing units 1 to 5.
Accordingly, set them to ON within the number of mounted timesharing units.
For example, in the case of single de 2-powersharing delivery, set ON
by "SWITCH 4" and "SWITCH 5" as shown below. Then, laser light is output
from branch shutter 1 as a single delivery and from branch shutter 2 and 3 as
2-powersharing delivery.