Amada ML-2350A-CE, Operation Manual, Page: 91 / 235

1. Setting Welding Schedules
91
ML-2350A/2351A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Setting the Output Status Check Screen (MONITOR Screen)
In the following, the method of setting the MONITOR screen is explained. On
this screen, the measured energy value of output laser light is checked, the
energy range to be monitored is set, and the upper limit value of flashlamp
input power is set.
Checking the Measured Energy Value of Laser Light
When laser light is output, the MONITOR screen is automatically displayed and a
measured energy value is displayed. The measured energy value of the last output
laser light can also be checked by the corresponding SCHEDULE number if a
registered SCHEDULE number is entered.
(1) Press the "SCHEDULE" setting button.
Enter the SCHEDULE number.
The measured energy value of the last output laser light and laser light waveform
are displayed according to the set SCHEDULE.
Setting the Laser Energy Range To Be Monitored
Set the upper limit value and lower limit value of energy to be monitored. This set
range is used as the allowable energy range.
(1) Press the "HIGH" setting button.
Enter the upper limit value.
The upper limit value of allowable energy is registered.
(2) Press the "LOW" setting button.
Enter the lower limit value.
The lower limit value of allowable energy is registered.