Amada ML-2350A-CE, Operation Manual, Page: 177 / 235

2. Printing Measured Value
177
ML-2350A/2351A
Chapter 6 Printing Set V
alues and Measured V
alues
_Option
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
2. Printing Measured Values
⇒
If the power supply is OFF, turn ON the MAIN POWER switch and then turn ON
the CONTROL keyswitch.
⇒
To print measured values, set welding schedules and output laser light actually.
After making sure that the measured waveform is displayed, perform the
following operations.
1
Displaying the PRINTOUT Screen
(1) Press the "PRINT" button.
The PRINTOUT screen appears.
2
Executing Printing
(1) Press the "POWER MONITOR" button.
The previously output measured values are printed.
⇒
The measured values and output waveform that can be printed are only the
previous laser output data. Measured values under other schedules cannot be
printed in succession by specifying SCHEDULE No.
Example Example
FORM:FIX (fixed waveform setting) FORM:FLEX (flexible waveform setting)