Amada ML-2350A-CE, Operation Manual, Page: 34 / 235

34
ML-2350A/2351A
2. Name and Function of Each Section on the Top Side
(4) EMERGENCY
STOP
(Button)
This is an emergency stop button. With this button pressed, the laser
welder operation is stopped. When the pressed button is turned in the
direction of RESET (clockwise), the button is reset to the initial state.
This button functions in the same way as the EMERGENCY STOP
button of the main unit.
Laser Oscillator Section
The laser oscillator section that makes its appearance after the top cover is
opened, and the inside that makes its appearance after branch unit cover is
removed, are explained below.
Function of Each Section on the Laser Oscillator
(1) Fixtures
The yellow fixtures used to lock the laser oscillator to prevent any
damage or dislocation during transportation. Be sure to remove these
two fixtures before starting operations.
(2) Branch Unit
Cover
Do not remove this cover except when installing and removing the
optical fiber.
Status where the branch unit cover is removed (for 3-powersharing/2-timesharing
delivery specification)
(1)
(2)
(9)
(8)
(7) (6) (5) (4)
(3)
(12) (11) (10)
Status where the top cover is open