Amada ML-2350A-CE, Operation Manual, Page: 87 / 235

1. Setting Welding Schedules
87
ML-2350A/2351A
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
Control by External Communication Control (RS-485 CONTROL)
When a command to set a control method is sent from the personal computer
connected to the main unit, external communication control is selected and "RS-485
CONTROL" is displayed in "CONTROL DEVICE" on the STATUS screen.
Setting the Opening/Closing Status of the Branch Shutter
To control the laser welder from the laser controller, press the "BEAM" button on
the STATUS screen to set the opening/closing the branch shutter. "SHUTTER 1" to
"SHUTTER 6" are associated with branch shutters 1 to 6.
At ON, the corresponding branch shutter is opened and laser light is output.
(1) Press the "BEAM" button.
A window to set the opening/closing the branch shutter and beamsplitter is
opened.
⇒
The displayed window depends on the specification.
(2) Press the setting buttons for "SHUTTER 1" to "SHUTTER 6" to set the opening/
closing of the branch shutters to ON/OFF.
(For single delivery specification)
(3) Press the "CANCEL" button.
The opening/closing of the branch shutter is set and the window is closed.