Amada ML-2350A-CE, Operation Manual, Page: 47 / 235

1. Connecting the Power Supply
47
ML-2350A/2351A
Chapter 2 Connections and Preparations of Each Section
Introduction Part
Install
atio
n and
Preparati
on Part
Operating Part
Maintenance Part
Appendixes
Chapter 2
●
Connections and Preparations of
Each Section
1. Connecting the Power Supply
CAUTION
Your qualified electrician must carry out the electrical connection to main power
supply. (Also follow your local accident prevention regulations, such as the German
Regulation, BGVA2.)
CAUTION
For the power supply side, we earnestly recommend using a leakage breaker with
the rated current of 10 A or more, which is applicable to harmonics and surges.
Item required
Phillips screwdriver
Operating Procedure
(1) Open the front door and remove the plastic cover on the power input terminal
400 V AC.
(2) Lead the attached power cable inward from the hole on the bottom plate of the
main unit.
(3) While confirming the terminal colors of the power cable, connect the power cable
to the L1, L2, L3, and PE power input terminals.
Installation and
Preparation Part
When the front door is open
Power input terminals
Power
cable
BRN
BLU BLK
YEL/GRN
2.5 sq
M5