Amada ML-2350A-CE, Operation Manual, Page: 78 / 235

78
ML-2350A/2351A
1. Setting Welding Schedules
Setting Laser Light Output Schedules
(SCHEDULE Screen)
This section explains the how to set the SCHEDULE screen. On this screen,
the peak value, output time, and output value of laser light are set and they are
registered after SCHEDULE number are given to them.
⇒
32 types of output schedules can be set and registered with SCHEDULE
numbers of #00 to #31. To perform laser welding, enter the registered
SCHEDULE numbers and laser welding can be performed in the set output
schedules.
⇒
It is convenient if you enter the set output schedules in the Appendix "Output
Schedule Data Entry Table" in advance.
⇒
For the details of setting items, refer to "Welding Schedule Setting Screen" on
page 65.
1
Setting Output Schedules by Fixed Waveform (FIX)
Set the output time and output value of laser light in "FLASH1" (first laser) to
"FLASH3" (third laser) by "FIX." Set the laser light that becomes a fixed waveform by
up to 3 divisions.
In the following example, SCHEDULE No.: #00, peak value: 7.0 kW, FLASH1: 1.0
ms/100%, COOL1: 0.0 ms, FLASH2: 1.5 ms/25%, COOL2: 0.0 ms, FLASH3: 3.0
ms/50%, up slope: 0.5 ms, and down slope: 1.0 ms are set as output schedules.
(1) Press the "SCHED" button to display the SCHEDULE screen.
(2) Press the "SCHEDULE" setting button.
Enter the SCHEDULE number.
(3) Press the "FORM" setting button to set "FIX."
(4) Press the "PEAK POWER" setting button.
Enter the laser output peak value.