ABB ACS880 Series, Firmware Manual

Page: 576 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
Configuration of encoder interface modules. Encoder module
settings 91
- / uint16 Displays the status of the digital inputs of FEN-xx
encoder interface modules. FEN DI status 91.1
Note: This parameter is read-only.
DI1 of interface module 1 (see parameters 91.11 and
91.12 )
DI1 /module 1 b0
DI2 of interface module 1 (see parameters 91.11 and
91.12 )
DI2 /module 1 b1
Reserved b2…3
DI1 of interface module 2 (see parameters 91.13 and
91.14 )
DI1 /module 2 b4
DI2 of interface module 2 (see parameters 91.13 and
91.14 )
DI2 /module 2 b5
Reserved b6…15
1 = 1 0000h…FFFFh
No option / uint16 Displays the type of the interface module found in the
location specified by parameter
91.12 Module 1 location .
Module 1 status 91.2
Note: This parameter is read-only.
0 No module detected in the specified slot. No option
1 A module has been detected but cannot be
communicated with.
2 The module type is unknown.
16 An FEN-01 module has been detected and is active. FEN-01
17 An FEN-11 module has been detected and is active. FEN-11
18 An FEN-21 module has been detected and is active. FEN-21
21 An FEN-31 module has been detected and is active. FEN-31
25 An FSE-31 module has been detected and is active. FSE-31
- / uint16 Displays the type of the interface module found in the
location specified by parameter
91.14 Module 2 location .
Module 2 status 91.3
For the indications, see parameter 91.2 Module 1 status .
Note: This parameter is read-only.
- / real32 Displays the temperature measured through the sensor
input of interface module 1. The unit (°C or °F) is
selected by parameter
96.16 Unit selection .
Module 1
temperature 91.4
Note: With a PTC sensor, the unit is ohms.
Note: This parameter is read-only.
- / - Temperature measured through interface module 1. 0.0 ... 1000.0 °C
576 Parameters