ABB ACS880 Series, Firmware Manual

Page: 228 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
- / real32 Displays the value of analog input AI2 after scaling. See
parameters
12.29 AI2 scaled at AI2 min and 12.30 AI2
scaled at AI2 max .
This parameter is read-only.
AI2 scaled value 12.22
1 = 1 / 1000 = 1 Scaled value of analog input AI2. -32768.000 ...
32767.000
mA / uint16 Selects the unit for readings and settings related to
analog input AI2.
Note: This setting must match the corresponding
hardware setting on the drive control unit (see the
hardware manual of the drive). Control board reboot
(either by cycling the power or through parameter
96.8
Control board boot ) is required to validate any changes
in the hardware settings.
AI2 unit selection 12.25
2 Volts. V
10 Milliamperes. mA
0.100 s / real32 Defines the filter time constant for analog input AI2.
See parameter
12.16 AI1 filter time .
AI2 filter time 12.26
1000 = 1 s / 1000 = 1
s Filter time constant. 0.000 ... 30.000 s
0.000 mA or V /
real32 Defines the minimum site value for analog input AI2.
Set the value actually sent to the drive when the analog
signal from plant is wound to its minimum setting.
See also parameter
12.1 AI tune .
AI2 min 12.27
1000 = 1 mA or V /
1000 = 1 mA or V Minimum value of AI2. -22.000 ... 22.000 mA
or V
20.000 mA or V /
real32 Defines the maximum site value for analog input AI2.
Set the value actually sent to the drive when the analog
signal from plant is wound to its maximum setting.
See also parameter
12.1 AI tune .
AI2 max 12.28
1000 = 1 mA or V /
1000 = 1 mA or V Maximum value of AI2. -22.000 ... 22.000 mA
or V
228 Parameters