ABB ACS880 Series, Firmware Manual

Page: 499 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
0 = Status of follower 20 is monitored continuously.
1 = Status of follower 20 is monitored only when it is
in stopped state. Follower 20 b3
0 = Status of follower 21 is monitored continuously.
1 = Status of follower 21 is monitored only when it is in
stopped state. Follower 21 b4
0 = Status of follower 22 is monitored continuously.
1 = Status of follower 22 is monitored only when it is in
stopped state. Follower 22 b5
0 = Status of follower 23 is monitored continuously.
1 = Status of follower 23 is monitored only when it is in
stopped state. Follower 23 b6
0 = Status of follower 24 is monitored continuously.
1 = Status of follower 24 is monitored only when it is in
stopped state. Follower 24 b7
0 = Status of follower 25 is monitored continuously.
1 = Status of follower 25 is monitored only when it is in
stopped state. Follower 25 b8
0 = Status of follower 26 is monitored continuously.
1 = Status of follower 26 is monitored only when it is in
stopped state. Follower 26 b9
0 = Status of follower 27 is monitored continuously.
1 = Status of follower 27 is monitored only when it is in
stopped state. Follower 27 b10
0 = Status of follower 28 is monitored continuously.
1 = Status of follower 28 is monitored only when it is in
stopped state. Follower 28 b11
0 = Status of follower 29 is monitored continuously.
1 = Status of follower 29 is monitored only when it is in
stopped state. Follower 29 b12
0 = Status of follower 30 is monitored continuously.
1 = Status of follower 30 is monitored only when it is
in stopped state. Follower 30 b13
0 = Status of follower 31 is monitored continuously.
1 = Status of follower 31 is monitored only when it is in
stopped state. Follower 31 b14
0 = Status of follower 32 is monitored continuously.
1 = Status of follower 32 is monitored only when it is in
stopped state. Follower 32 b15
1 = 1 0000h…FFFFh
60.0 s / uint16 Defines a wake-up delay during which no
master/follower communication faults or warnings are
generated. This is to allow all drives on the
master/follower link to power up.
The master cannot be started until the delay elapses
or all monitored followers are found to be ready. M/F wake up delay 60.31
10 = 1 s / 10 = 1 s Master/follower wake-up delay. 0.0 ... 180.0 s
Parameters 499