ABB ACS880 Series, Firmware Manual

Page: 433 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
4 Digital input DI3 ( 10.2 DI delayed status , bit 2). DI3
5 Digital input DI4 ( 10.2 DI delayed status , bit 3). DI4
6 Digital input DI5 ( 10.2 DI delayed status , bit 4). DI5
7 Digital input DI6 ( 10.2 DI delayed status , bit 5). DI6
10 Digital input/output DIO1 ( 11.2 DIO delayed status , bit
0).
DIO1
11 Digital input/output DIO2 ( 11.2 DIO delayed status , bit
1).
DIO2
See Terms and abbreviations (page 169) . Other [bit]
On / uint32 Selects a source that enables/disables process PID
control.
See also parameter
40.7 Set 1 PID operation mode .
0 = Process PID control disabled.
1 = Process PID control enabled.
Set 1 PID activation
source 40.60
0 0. Off
1 1. On
2 Process PID control is disabled when external control
location
EXT1 is active, and enabled when external control
location
EXT2 is active.
See also parameter
19.11 Ext1/Ext2 selection .
Follow Ext1/Ext2
selection
3 Digital input DI1 ( 10.2 DI delayed status , bit 0). DI1
4 Digital input DI2 ( 10.2 DI delayed status , bit 1). DI2
5 Digital input DI3 ( 10.2 DI delayed status , bit 2). DI3
6 Digital input DI4 ( 10.2 DI delayed status , bit 3). DI4
7 Digital input DI5 ( 10.2 DI delayed status , bit 4). DI5
8 Digital input DI6 ( 10.2 DI delayed status , bit 5). DI6
11 Digital input/output DIO1 ( 11.2 DIO delayed status , bit
0).
DIO1
12 Digital input/output DIO2 ( 11.2 DIO delayed status , bit
1).
DIO2
See Terms and abbreviations (page 169) . Other [bit]
0.00 / real32 Storage parameter for receiving a process feedback
value eg. through the embedded fieldbus interface.
The value can be sent to the drive as Modbus I/O data.
Set the target selection parameter of that particular
data (
58.101 … 58.124 ) to Feedback data storage . In 40.8
Set 1 feedback 1 source (or 40.9 Set 1 feedback 2
source ), select Feedback data storage .
Feedback data
storage 40.91
100 = 1 / 100 = 1 Storage parameter for process feedback. -327.68 ... 327.67
Parameters 433