ABB ACS880 Series, Firmware Manual

Page: 255 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
1000 = 1 mA or V /
1000 = 1 mA or V Forced value of analog input AI3. -22.000 ... 22.000 mA
or V
mA / uint16 (Visible when 14.1 Module 1 type = FIO-11 )
Shows the position of the hardware current/voltage
selector on the I/O extension module.
Note: The setting of the current/voltage selector must
match the unit selection made in parameter
14.60 AI3
unit selection . I/O module reboot either by cycling the
power or through parameter 96.8 Control board boot
is required to validate any changes in the hardware
settings.
AI3 HW switch
position 14.59
10 Milliamperes. mA
2 Volts. V
mA / uint16 (Visible when 14.1 Module 1 type = FIO-11 )
Selects the unit for readings and settings related to
analog input AI3.
Note: This setting must match the corresponding
hardware setting on the I/O extension module (see the
manual of the I/O extension module). The hardware
setting is shown by parameter
14.59 AI3 HW switch
position . I/O module reboot either by cycling the power
or through parameter 96.8 Control board boot is
required to validate any changes in the hardware
settings.
AI3 unit selection 14.60
10 Milliamperes. mA
2 Volts. V
1 ms / uint16 (Visible when 14.1 Module 1 type = FIO-11 )
Selects a hardware filtering time for AI3.
See also parameter
14.62 AI3 filter time .
AI3 filter gain 14.61
0 No filtering. No filtering
1 125 microseconds. 125 us
2 250 microseconds. 250 us
3 500 microseconds. 500 us
4 1 millisecond. 1 ms
5 2 milliseconds. 2 ms
6 4 milliseconds. 4 ms
7 7.9375 milliseconds. 7.9375 ms
Parameters 255