ABB ACS880 Series, Firmware Manual

Page: 346 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
- / - Torque reference after application of reference additive
1. For scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
- / real32 Displays the torque reference after limiting and
ramping. See the control chain diagram on page
751 .
This parameter is read-only.
Torque ref ramp out 26.74
- / - Torque reference after limiting and ramping. For
scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
- / real32 Displays the torque reference after control mode
selection.
See the control chain diagram on page
753 .
This parameter is read-only.
Torque reference act
5 26.75
- / - Torque reference after control mode selection. For
scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
- / real32 Displays the torque reference after application of
reference additive 2. See the control chain diagram on
page
753 .
This parameter is read-only.
Torque reference act
6 26.76
- / - Torque reference after application of reference additive
2. For scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
- / real32 Displays the value of the source of torque reference
additive 2. See the control chain diagram on page
753 .
This parameter is read-only.
Torque ref add A
actual 26.77
- / - Torque reference additive 2. For scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
- / real32 Displays the value of torque reference additive 2 before
it is added to torque reference. See the control chain
diagram on page
753 .
This parameter is read-only.
Torque ref add B
actual 26.78
- / - Torque reference additive 2. For scaling, see parameter
46.3 .
-1600.0 ... 1600.0 %
10.0 / real32 Rush controller gain term. See section Rush
control (page 92) .
Rush control gain 26.81
1 = 1 / 10 = 1 Rush controller gain (0.0 = disabled). 0.0 ... 10000.0
2.0 s / real32 Rush controller integration time term. Rush control
integration time 26.82
1 = 1 s / 10 = 1 s Rush controller integration time (0.0 = disabled). 0.0 ... 10.0 s
346 Parameters