manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 8

1.2  Document history

Rev.

Description of version / changes

Who

Date

1.0.0

First release

ABB

19.12.2012

1.0.1

Minor typos were corrected. TÜV certificate was added.

The text was changed in the document:

n

Safety I/O inputs and outputs are not electrically isolated from

the other electronic circuitry of the module.

n

The safety values for safety outputs of DX581-S (-XC) module

are only valid if the parameter “Detection” is set to "On".

n

DC (Diagnostic Coverage) for DX581-S (-XC) module shall be

≥ 94 %.

n

The clarification was added that the boot project update on

SM560-S is possible only if no boot project is loaded on SM560-

S.

n

Not more than one communication error (CE_CRC or

Host_CE_CRC output signals become equal to TRUE) per 100

hours is allowed to be acknowledged by the operator using

OA_C input signal without consulting the responsible safety per-

sonnel.

n

SM560-S cycle time shall be included three times instead of two

times in Safety Function Response Time calculation.

n

The values for input delay accuracy in Safety Function

Response Time calculation were updated.

n

Update of Appendix A with system data for AC500-S-XC.

ABB

08.03.2013

1.0.2

Words "Original Instructions" have been added to document title

ABB

17.04.2015

Introduction

Document history 

30.03.2017

AC500-S

8

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands