manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 175

Install GSDML files to be able to configure 3

rd

 party PROFIsafe F-Devices as follows:

In order to use 3

rd

 party F-Devices with AC500-S Safety PLC, the safety devices must be on the PROFINET

IO and support the PROFIsafe bus profile in V2 mode [3]. The basis for configuring all (Safety and Non-

Safety) PROFINET devices is the specification of the device in the GSDML file (Generic Station Description

Markup Language).

I/O device properties are saved in the GSDML file. For Safety PROFINET devices, portions of the specifica-

tion are protected by a CRC [3]. GSDML files are supplied by the device manufacturers.

 NOTICE!

Only GSDML files with version 2.1 are fully supported by PS501 Control Builder Plus / ABB Automa-

tion Builder. GSDML files with version 2.2 and higher are only partially supported.

1.

To install GSDML file go to 

“Device Repository…”

 menu.

Fig. 70: Device repository

2.

Then press 

“Install…”

 button to pick-up a GSDML file and install it.

ð

After successful installation, new devices can be found in Device Repository under “PROFINET”

object (Fig. 72)

Configuration and programming

System configuration and programming > Working with PROFINET / PROFIsafe F-Devices

30.03.2017

AC500-S

175

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands