manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 419

5 

➔

 5 %

6 

➔

 6 %

7 

➔

 7 %

8 

➔

 8 %

9 

➔

 9 %

10 

➔

 10 %

11 

➔

 11 %

12 

➔

 12 %

Min_Max_Value:

0 

➔

 Min

128 

➔

 Max

Compare calculated 

Dec_ExtConf0_2

 (

Ä

 Step 5

) with 

“Analog inputs 0/2 – Extended configura-

tion”.

 They have to be equal.

If they are not equal, stop the procedure and re-do the configuration and comparison.

If after the second iteration, there is still a difference between those values, stop verification procedure

and contact ABB technical support.

5.

Repeat step 4 for “Analog inputs 1/3 – Extended configuration” value.

Checklists for AC500-S Commissioning

Verification procedure for safe iParameter setting in AC500-S Safety I/Os >  Verification tables for iParameter settings in AC500-S

Safety I/Os

30.03.2017

AC500-S

419

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands