ABB AC500-S Safety User Manual Download Page 173

Page: 173 / 452

Only members of Safety group are allowed to modify Safety modules, change their configuration, etc. By

default, no users without proper log-in and access rights can access safety modules.

Project administrator is allowed to use all available User Management features to find the best suitable user

setup with appropriate rights (

AC500 User Documentation

DANGER!

It is the responsibility of project administrator to setup a proper user management for the given safety

application project to avoid unauthorized access to Safety modules.

Passwords for users with Safety group membership shall be properly selected (at least 8 symbols are

recommended with a combination of numbers and letters). An access to passwords must be strictly

controlled.

Make sure that you set

“Deny”

permission for proper users and groups (e.g., Everyone) through menu

“Project

User Management

Permissions …”

to avoid unauthorized creation of new users in the

Safety group (Fig. 68 and Fig. 69).

Fig. 68: Selection of user management

Configuration and programming

System configuration and programming > Creation of new project and user management

30.03.2017

AC500-S

173

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands

ABB AC500-S, Safety User Manual

Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands