manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 260

 DANGER!

It is of no concern to transfer data values from Safety CPU to Non-safety CPU (e.g., for diagnosis and

later visualization on the operator panels), but it is not recommended to transfer data values from Non-

safety CPU to Safety CPU. In the latter case, end-users have to define additional process-specific vali-

dation procedures in the safety program to check the correctness of the transferred non-safety data, if

they would like to use those non-safety values for safety functions.

Configuration and programming

AC500-S Libraries > DPRAM_SM5XX_SEND and DPRAM_SM5XX_REC in SysInt_AC500_V10.lib

30.03.2017

AC500-S

260

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands