manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 187

F_Parameter

Definition

Allowed values

Default value

F_Dest_Add

The unique F-Device address

which will be compared with the

set hardware switch address in

F-Device. The F_Dest_Add

parameter is a logic address

designation that can be

assigned freely but unambigu-

ously.

[1 – 255] for AC500-S

Safety I/O modules.

2

F_WD_Time

Watchdog time in ms for receipt

of the new valid telegram

[10 – 10000]

100

F_iPar_CRC

CRC over iParameters (manu-

facturer specific) of F-Devices

(Safety I/Os).

[0 - 4294967295]

Hex [0 - FFFFFFFF]

Dependent on the

module type

F_Par_CRC

CRC1 signature calculation

across the F-Parameters

[0 - 65535]

Hex [0 - FFFF]

Dependent on the

module type

iParameters are individual F-Device parameters which are transferred to F-Devices with a proper

F_iPar_CRC parameter.

 NOTICE!

After changing iParameters, you have to go to F-Parameter tab, re-calculate iParameter CRC and

paste it to F_iPar_CRC F-Parameter row. Otherwise, the new parameter set will not be accepted by

the F-Device because F_iPar_CRC will not be a valid one for a given iParameter set.

As for 3

rd

 party F-Devices coming from GSDML files, 

one has no “Checksum iParameter” feature,

because PS501 Control Builder Plus / ABB Automation Builder does not know a specific algorithm
used for F_iPar_CRC calculation in 3

rd

 party devices. One has to calculate F_iPar_CRC using a spe-

cial tool delivered by the F-Device manufacturer for engineering its F-Devices.

Another option is to contact the vendor of the F-Device and ask for F_iPar_CRC value for the given F-
Device iParameter. As soon as F_iPar_CRC is available for the given 3

rd

 party F-Device, one can

paste it to the F_iPar_CRC row in F-Parameter editor.

Configuration and programming

System configuration and programming > Instantiation and configuration of safety modules/Definition of variable names

30.03.2017

AC500-S

187

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands