ABB AC500-S Safety User Manual Download Page 317

Page: 317 / 452

Standards

Requirements

EN 954-1: 1996

5.4 Manual reset

ISO 12100-2:

2003

4.11.4: Restart following power failure/spontaneous restart

This FB controls an entrance to a hazardous area via an interlocking guard with guard locking (“four state

interlocking”).

The function controls the guard lock and monitors the position of the guard and the lock. This function block

can be used with a mechanical locked switch.

The operator requests to get access to the hazardous area. The guard can only be unlocked when the haz-

ardous area is in a safe state. The guard can be locked if the guard is closed. The machine can be started

when the guard is closed and the guard is locked. An open guard or unlocked guard will be detected in the

event of a safety-critical situation.

The S_StartReset and S_AutoReset inputs shall only be activated if it is ensured that no hazardous situation

can occur when the PES is started.

Configuration and programming

AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib

30.03.2017

AC500-S

317

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands

ABB AC500-S, Safety User Manual

Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands