manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 389

Fig. 125: Timing diagrams for SF_EDM: S_StartReset = TRUE

The following conditions force a transition to the Error state:

n

Invalid static Reset signal in the process.

n

Invalid EDM signal in the process.

n

S_OutControl and Reset are incorrectly interconnected due to programming error.

Error Behavior

In error states, the outputs are as follows:

n

In the event of an error, the S_EDM_Out is set to FALSE and remains in this safe state.

n

An EDM error message must always be reset by a rising trigger at Reset.

n

A Reset error message can be reset by setting Reset to FALSE.

Configuration and programming

AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib

30.03.2017

AC500-S

389

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands