manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 22

2.8  Exchange of modules

SM560-S Safety CPU automatically detects an exchange of Safety I/O modules during the system start-up.

The overall system (SM560-S Safety CPU and PROFIsafe features of unique addresses for Safety devices

[3]) provides a mechanism to automatically ensure that exchanged safety modules are operated with correct

parameters and incompatible module types are rejected. No unsafe state is possible if wrong Safety I/O

module type is put on the given terminal unit TU582-S.

2.9  AC500-S restart behaviour

When SM560-S Safety CPU is restarted using powering off/on, the previously saved error information is lost.

The Safety I/O modules receive their parameter sets each time during system start-up. SM560-S is able to

reintegrate Safety I/O modules using PROFIsafe start-up behaviour [3]. If your process does not allow an

automatic start-up after powering off/on, you must program a restart protection in the safety program. The

safety process data outputs must be blocked until manually acknowledged. These safety outputs must not

be enabled until it is safe to do so and faults were corrected.

2.10  Replacing AC500-S Safety PLC components

When replacing software components on your programming device or PC with a newer version, you must

observe the notes regarding upward and downward compatibility in the documentation and readme files for

these products.

Hardware components for AC500-S (Safety CPU and Safety I/Os) are replaced in the same way as in a

standard AC500 automation system.

2.11  Environmentally friendly disposal

All AC500-S safety components from ABB are designed with a minimal environment pollution effect. To

enable environmentally friendly disposal of AC500-S safety components, they can be partially disassembled

to separate various components from each other. Disposal of those materials shall be done in accordance

with applicable national and international laws.

Overview of AC500-S Safety PLC

Environmentally friendly disposal 

30.03.2017

AC500-S

22

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands