manualshive.com logo in svg

ABB AC500-S, Safety User Manual

Share
Download
ABB AC500-S Safety User Manual Download Page 363

Typical Timing Diagram

Fig. 116: Timing diagram for SF_MutingPar_2Sensor (S_StartReset = TRUE, Reset = FALSE, S_Mutin-

gLamp = TRUE)

The FB detects the following error conditions:

n

DiscTimeEntry has been set to value less than T#0s or greater than T#4s.

n

MaxMutingTime has been set to a value less than T#0s or greater than T#10min.

n

The discrepancy time for the S_MutingSwitch11/S_MutingSwitch12 sensor pair has been exceeded.

n

The muting function (S_MutingActive = TRUE) exceeds the maximum muting time MaxMutingTime.

n

Muting sensors S_MutingSwitch11,S_MutingSwitch12 are activated in the wrong order.

n

Muting sequence starts without being enabled by MutingEnable

n

Static muting sensor signals.

n

A faulty muting lamp is indicated by S_MutingLamp = FALSE.

n

A static Reset condition is detected in state 8001 and 8003.

Error Behaviour

In the event of an error, the S_AOPD_Out and S_MutingActive outputs are set to FALSE. The DiagCode

output indicates the relevant error code and the Error output is set to TRUE.

A restart is inhibited until the error conditions are cleared and the Safe state is acknowledged with Reset by

the operator.

Configuration and programming

AC500-S Libraries > SafetyBlocks_PLCopen_AC500_v22.lib

30.03.2017

AC500-S

363

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands