ABB AC500-S Safety User Manual Download Page 73

Page: 73 / 452

Error

class

Compo-

nent or

Inter-

face

Device Module

Channel

Error

Error text

Remedy

1..10

0..15

Channel cross-

talk error

Check I/O module wiring.

Restart I/O module, if

needed. If this error per-

sists, replace I/O module.

1..10

0..7

Module 0:

Channel test

pulse cross-

talk error

Module 2:

Channel read-

back error

Check I/O module wiring.

Restart I/O module, if

needed. If this error per-

sists, replace I/O module.

1..10

0..7

Channel cross-

talk error

Check I/O module wiring.

Restart I/O module, if

needed. If this error per-

sists, replace I/O module.

Table 6: List of error messages for Safety I/O modules (channel or module reintegration is not possible)

Error

class

Compo-

nent or

Inter-

face

Device Module

Channel

Error

Error text

Remedy

1..10

F-Parameter

configuration

and address

switch value

do not match.

Check I/O module F-

Parameter configuration

and module address switch

value.

1..10

Parameter

value

Check master or configura-

tion

1..10

Checksum

error in the I/O

module

Non-safety I/O: Replace I/O

module

Safety I/O: Check safety

configuration and CRCs for

I- and F-Parameters.

1..10

Plausibility

check failed

(iParameter)

Check configuration

The complete list of AC500 error messages

AC500 User Documentation [4]

AC500-S Safety Modules

Generic Safety I/O module behaviour > Diagnosis

30.03.2017

AC500-S

Summary of Contents for AC500-S





































































































































































































































































































































































































































































Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands

ABB AC500-S, Safety User Manual

Search results

Summary of Contents for AC500-S

Reviews:

Brands by name

Popular brands