Yamaha YZ250F(W) Скачать руководство пользователя страница 252

Страница: 252 / 676

3 - 42

INSP

ADJ

STEERING HEAD INSPECTION AND ADJUSTMENT

• Tighten the steering ring nut

using

steering nut wrench

NOTE:

• Apply the lithium soap base grease on the

thread of the steering stem.

• Set the torque wrench to the steering nut

wrench so that they form a right angle.

Steering nut wrench:

YU-33975/90890-01403

Steering ring nut (initial tightening):

38 Nm (3.8 m • kg, 27 ft • lb)

• Loosen the steering ring nut one turn.
• Retighten the steering ring nut using the

steering nut wrench.

WARNING

Avoid over-tightening.

Steering ring nut (final tightening):

7 Nm (0.7 m • kg, 5.1 ft • lb)

• Check the steering stem by turning it lock

to lock. If there is any binding, remove the
steering stem assembly and inspect the
steering bearings.

• Install the washer

, upper bracket

washer

, steering stem nut

, handle-

bar

, handlebar upper holder

and

number plate

NOTE:

• The handlebar upper holder should be

installed with the punched mark

forward.

• Install the handlebar so that the marks

are in place on both sides.

• Install the handlebar so that the projection

of the handlebar upper holder is posi-

tioned at the mark on the handlebar as
shown.

• Insert the end of fuel breather hose

into

the hole in the steering stem.

CAUTION:

First tighten the bolts on the front side of
the handlebar upper holder, and then
tighten the bolts on the rear side.

Содержание YZ250F(W)





































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание YZ250F(W)

Отзывы:

Похожие инструкции для YZ250F(W)

Бренды по названию

Популярные бренды

Yamaha YZ250F(W), Руководство по эксплуатации для владельца

Результаты поиска

Содержание YZ250F(W)

Отзывы:

Похожие инструкции для YZ250F(W)

Бренды по названию

Популярные бренды