VD300 Series Inverter User Manual
Parameter Description
- 117 -
6.7 P06 Output Terminal Function Parameter Group
P06.00
HDO1 Terminals Output
Mode Selection
0: HS Pulse output
1: Switch signal output
0
○
HDO1 terminal is programmable multiplexing terminal. It can be used as high-speed pulse output
(HDO), It can also be used as collector open circuit output terminal (DO).
P06.02
Digital Output Effective
Logical Selection
0x00~0x1F: bit0~bit3 corresponds to
DO1, HDO1, T1, T2, DO5, each of the
binary bit set value corresponding to the
function
0: Switch closed
1: Switch open
0x00
○
Define output side digital output logic.
0: Switchover closed, digital output terminal and corresponding mutual terminal connected is Enabled
status, disconnected is Disabled status.
1: Switchover opened, digital output terminal and corresponding mutual terminal connected is
Disabled status, connected is Disabled status.
P06.03
DO1 Digit Output
Function
0
○
P06.04
HDO1 Digital Output
Mode Function
0
○
P06.05
Relay T1 Digit Output
Selection
0
○
P06.06
Relay T2 Output
Selection
0
○
P06.07
DO5 Function Select Ion
Of Output Terminals
(Extension Card)
0~33, see table blow
0
○
Digit output terminal function table:
Set
Value
Function
Description
0
Disabled
There have no function on output terminals
1
Inverter in running
It indicate the inverter is in running state, have the output
frequency (can be zero), the output ON signal.
2
Forward running
It indicates the inverter is in forward running state, there have
output frequency, output ON signal at this time.
3
Reverse running
It indicates the inverter is in reverser running state, there have
output frequency, output ON signal at this time.
4
JOG running
It indicates the inverter is in jog running state, output ON signal at
this time.
5
Inverter fault
When the inverter fails and downtime, output ON signal.
6
Pre excitation
When the inverter in excitation, output ON signal.
7
Frequency inverter
When the main circuit and control circuit of supply is stable, and
Содержание VD300 Series
Страница 2: ......