Vicruns VD300 Series, Руководство пользователя

Страница: 114 / 188

Parameter Description VD300 Series Inverter User Manual
- 110 -
23 External stop
In any control mode, the terminal is used to make frequency
converter and deceleration and stop or Coast to stop, stop method
by function code P01.05 setting determines;
24
Emergency stop
function
The terminal is enabled, inverter stop at the fastest speed;
25 PID control pause PID temporarily adjusting;
26
Reverse PID action
direction The terminal is enabled, PID action direction and the reverse
direction set by P08.04 set;
27
PID parameter
switchover
To switchover PID parameter;
28
Pre-excitation
command The terminal (level) is effective, the pre-excitation of inverter is
enabled until the terminal is disabled;
29
Torque control
disabled Prohibit the inverter into torque control, inverter enter the speed
control method
30
Acceleration /
deceleration disabled
Protect the inverter from affecting by the external signals (except
emergency stop command), and maintain the current output
frequency;
31
Switchover between
set A and set B
32
Switchover between
combined set and set
A
33
Switchover between
combined set and set
B
When the terminal is effective, the frequency converter source
switching in various frequency source or frequency source
combinations;
34 Simple PLC stop reset
In stop state, when the terminal (pulse) effectively, the inverter
recover to initial status of PLC;
35 Simple PLC pause
Inverter in the executive summary of PLC operation process,
when the terminal effective (level), simple PLC to suspend
operation, when the terminal failure, the inverter easy to recover
from a pause state of PLC operation;
36 Counter trigger The input terminal of counter;
37 Counter reset Clear up the counter status;
38 Length trigger Input terminal of length counter;
39 Length reset Length counter clear up;
40
Command switchover
to keypad
41
Command switchover
to terminal
42
Command switchover
to communication
When the terminal effective (level), switchover the inverter
command source to the corresponding command source;
43
Power consumption
clear
Clear up the power consumption counter ( pulse effective);