Thermo Scientific Dionex ICS-2000, Руководство оператора

Страница: 196 / 390

ICS-2000 Ion Chromatography System
5-86
Doc. 031857-03 4/06
4. Thread the three lines from the EPM (red, yellow, and blue labels)
through the opening on the side of the new holder (see Figure 5-75 ).
5. Turn the new EGC holder
upside down (see
Figure 5-76 ).
NOTE To help retain the
fittings and ferrules
on the lines, remove
the coupler from each
line just before
connecting the line to
a port.
Figure 5-76. EGC Holder (upside down)
6. Connect the lines from the EPM (red, yellow, and blue labels) to the
corresponding lines in the holder.
7. Disconnect the line labeled
TO CR-TC/EPM REGEN IN
(orange label)
from the
REGEN IN
port on the EPM and connect the new
TO CR-
TC/EPM REGEN IN
line (orange label) to the port.
Figure 5-75. TO CR-TC/EPM Lines Outside of Holder
TO CR-TC/EPM
ELUENT OUT
(yellow label)
TO CR-TC/EPM
ELUENT IN
(red label)
TO CR-TC/EPM
REGEN OUT
(blue label)