Registers
654
SPRUHI7A – December 2012 – Revised June 2016
Copyright © 2012–2016, Texas Instruments Incorporated
High-Definition Video Processing Subsystem (HDVPSS)
1.3.8.75 VPDMA_int3_channel1_int_stat Register (offset = 138h) [reset = 0h]
VPDMA_int3_channel1_int_stat is shown in
and described in
Figure 1-375. VPDMA_int3_channel1_int_stat Register
31
30
29
28
27
26
25
24
INT_STAT_VIP1_MU
LT_PORTB_SRC9
INT_STAT_VIP1_MU
LT_PORTB_SRC8
INT_STAT_VIP1_MU
LT_PORTB_SRC7
INT_STAT_VIP1_MU
LT_PORTB_SRC6
INT_STAT_VIP1_MU
LT_PORTB_SRC5
INT_STAT_VIP1_MU
LT_PORTB_SRC4
INT_STAT_VIP1_MU
LT_PORTB_SRC3
INT_STAT_VIP1_MU
LT_PORTB_SRC2
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
23
22
21
20
19
18
17
16
INT_STAT_VIP1_MU
LT_PORTB_SRC1
INT_STAT_VIP1_MU
LT_PORTB_SRC0
INT_STAT_VIP1_MU
LT_PORTA_SRC15
INT_STAT_VIP1_MU
LT_PORTA_SRC14
INT_STAT_VIP1_MU
LT_PORTA_SRC13
INT_STAT_VIP1_MU
LT_PORTA_SRC12
INT_STAT_VIP1_MU
LT_PORTA_SRC11
INT_STAT_VIP1_MU
LT_PORTA_SRC10
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
15
14
13
12
11
10
9
8
INT_STAT_VIP1_MU
LT_PORTA_SRC9
INT_STAT_VIP1_MU
LT_PORTA_SRC8
INT_STAT_VIP1_MU
LT_PORTA_SRC7
INT_STAT_VIP1_MU
LT_PORTA_SRC6
INT_STAT_VIP1_MU
LT_PORTA_SRC5
INT_STAT_VIP1_MU
LT_PORTA_SRC4
INT_STAT_VIP1_MU
LT_PORTA_SRC3
INT_STAT_VIP1_MU
LT_PORTA_SRC2
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
7
6
5
4
3
2
1
0
INT_STAT_VIP1_MU
LT_PORTA_SRC1
INT_STAT_VIP1_MU
LT_PORTA_SRC0
INT_STAT_GRPX3_C
LUT
INT_STAT_GRPX2_C
LUT
INT_STAT_GRPX1_C
LUT
INT_STAT_GRPX3_S
TENCIL
INT_STAT_GRPX2_S
TENCIL
INT_STAT_GRPX1_S
TENCIL
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit;
-n
= value after reset
Table 1-287. VPDMA_int3_channel1_int_stat Register Field Descriptions
Bit
Field
Type
Reset
Description
31
INT_STAT_VIP1_MULT_
PORTB_SRC9
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src9. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
30
INT_STAT_VIP1_MULT_
PORTB_SRC8
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src8. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
29
INT_STAT_VIP1_MULT_
PORTB_SRC7
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src7. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
28
INT_STAT_VIP1_MULT_
PORTB_SRC6
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src6. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
27
INT_STAT_VIP1_MULT_
PORTB_SRC5
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src5. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
26
INT_STAT_VIP1_MULT_
PORTB_SRC4
W
0h
The last write DMA transaction has completed for channel
vip1_mult_portb_src4. All data from the channel has been sent and
received by the external memory. If a new channel has not been
setup for the client vip1_lo_uv then the client will be fully empty at
this point. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.