Memory
Y00 Y10 Y20
Y01 Y11 Y21
Y0M Y1M Y2M
YN0
YN1
YNM
Luma Only Client
Y00 Y10 Y20
Y01 Y11 Y21
Y0M Y1M Y2M
YN0
YN1
YNM
Memory
Y00 Y10 Y20
Y01 Y11 Y21
Y0M Y1M Y2M
YN0
YN1
YNM
Luma Only Client
Luma Chroma Client
Y00 Y10 Y20
Y01 Y11 Y21
Y0M Y1M Y2M
YN0
YN1
YNM
Y00 Y10 Y20
U00 V00 U10
Y01 Y11 Y21
U01 V01 U21
Y0M Y1M Y2M
U00 V00 U10
YN0
VN0
YN1
VN1
YNM
VNM
Memory
Luma Only Client
Luma Chroma Client
Internal Modules
290
SPRUHI7A – December 2012 – Revised June 2016
Copyright © 2012–2016, Texas Instruments Incorporated
High-Definition Video Processing Subsystem (HDVPSS)
1.2.13.6.1.2 Y 4:2:2 (Data Type 1)
The Y 4:2:2 data type is used for a co-planar 4:2:2 data. In this mode the data is assumed to be a single
byte with each pixel is packed in a line. If a 2D transfer of the data is used the VPDMA will assume this
data type is stored in an 8 bit container as described in the TILER specification. This data block should
have the width and the height of the desired frame sent by the VPDMA to the receive client.
Figure 1-172. Y 4:2:2 (Data Type 1)
1.2.13.6.1.3 Y 4:2:0 (Data Type 2)
The Y 4:2:0 data type is used for a co-planar 4:2:0 data type. In this mode the data is assumed to be a
single byte with each pixel is packed in a line. If a 2D transfer of the data is used the VPDMA will assume
this data type is stored in an 8 bit container as described in the TILER specification. This data block
should have the width and the height of the expected frame for the client.
Figure 1-173. Y 4:2:0 (Data Type 2)