Registers
511
SPRUHI7A – December 2012 – Revised June 2016
Copyright © 2012–2016, Texas Instruments Incorporated
High-Definition Video Processing Subsystem (HDVPSS)
1.3.8.27 VPDMA_int0_client0_int_stat Register (offset = 78h) [reset = 0h]
VPDMA_int0_client0_int_stat is shown in
and described in
Figure 1-327. VPDMA_int0_client0_int_stat Register
31
30
29
28
27
26
25
24
INT_STAT_GRPX1_D
ATA
INT_STAT_COMP_W
RBK
INT_STAT_SC_OUT
Reserved
W-0h
W-0h
W-0h
R-0h
23
22
21
20
19
18
17
16
Reserved
INT_STAT_SC_IN_LU
MA
INT_STAT_SC_IN_C
HROMA
INT_STAT_PIP_WRB
K
INT_STAT_DEI_SC_
OUT
Reserved
R-0h
W-0h
W-0h
W-0h
W-0h
R-0h
15
14
13
12
11
10
9
8
INT_STAT_DEI_HQ_
MV_OUT
Reserved
INT_STAT_DEI_HQ_
MV_IN
Reserved
W-0h
R-0h
W-0h
R-0h
7
6
5
4
3
2
1
0
Reserved
INT_STAT_DEI_HQ_
3_CHROMA
INT_STAT_DEI_HQ_
3_LUMA
INT_STAT_DEI_HQ_
2_CHROMA
INT_STAT_DEI_HQ_
2_LUMA
INT_STAT_DEI_HQ_
1_LUMA
INT_STAT_DEI_HQ_
1_CHROMA
R-0h
W-0h
W-0h
W-0h
W-0h
W-0h
W-0h
LEGEND: R/W = Read/Write; R = Read only; W1toCl = Write 1 to clear bit;
-n
= value after reset
Table 1-239. VPDMA_int0_client0_int_stat Register Field Descriptions
Bit
Field
Type
Reset
Description
31
INT_STAT_GRPX1_DAT
A
W
0h
The client interface grpx1_data has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
30
INT_STAT_COMP_WRBK W
0h
The client interface comp_wrbk has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
29
INT_STAT_SC_OUT
W
0h
The client interface sc_out has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having received the End of Frame signal from the
transmitting module. This event will cause a one to be set in this
register until cleared by software. Write a 1 to this field to clear the
value.
28-21
Reserved
R
0h
20
INT_STAT_SC_IN_LUMA
W
0h
The client interface sc_in_luma has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.
19
INT_STAT_SC_IN_CHRO
MA
W
0h
The client interface sc_in_chroma has reached its current configured
interrupt event as specified by the last received control descriptor for
this client. If no control descriptor has been configured this will
default to having sent the End of Frame signal to the receiving
module. This event will cause a one to be set in this register until
cleared by software. Write a 1 to this field to clear the value.