manualshive.com logo in svg

Texas Instruments DM38x DaVinci, Руководство пользователя


Поделиться
Скачать
background image

www.ti.com

Internal Modules

281

SPRUHI7A – December 2012 – Revised June 2016

Submit Documentation Feedback

Copyright © 2012–2016, Texas Instruments Incorporated

High-Definition Video Processing Subsystem (HDVPSS)

Table 1-109. HDVPSS Interrupt Sources (continued)

Interrupt

Interrupt Group

Description

control_descriptor_int2

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 2.

control_descriptor_int3

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 3.

control_descriptor_int4

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 4.

control_descriptor_int5

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 5.

control_descriptor_int6

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 6.

control_descriptor_int7

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 7.

control_descriptor_int8

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 8.

control_descriptor_int9

descriptor

A Send Interrupt Control Descriptor has been received by the list manager with
a source value of 9.

1.2.13.5 VPDMA Configuration

The following section describes the different ways of configuring VPDMA for data transfers.

1.2.13.5.1 Regular List

A regular list executes each descriptor in order until the end of the list is reached. When the end of the list
is reached an interrupt is sent and the list can be reused by software. A regular list can contain any
descriptor types. Software creates the list at some location in external memory. After completing writing
the list software then writes the location of the list to the LIST_ADDRESS register and then writes the
LIST_ATTRIBUTE register. If the NUMBER in the LIST_ATTRIBUTE is not an active list then the List will
be loaded and begin to execute the next time the List Manager gets to IDLE after processing previous
loaded lists. If the NUMBER in the LIST_ATTRIBUTE is busy then the LIST_ADDRESS and
LIST_ATTRIBUTE registers will be locked until the active list specified by NUMBER completes. Any writes
to the LIST_ADDRESS or LIST_ATTRIBUTE will result in mmr_wready being held inactive until the list is
freed.

The different ports inside VPDMA requires different list setup.

1.2.13.5.1.1 Video Input Ports

The Video Input Ports (VIP) can be used in multiple ways. Depending on how the input ports are
configured will determine how the lists to manage them need to be setup. The ways in which the ports can
work are multiplexed data stream, single YUV color separate stream, dual YUV interleaved or single RGB
stream. Each port also has an ancillary data port that can run either multiplexed or single data stream and
shares the buffering with the main data stream. For all cases the descriptor must be loaded into the client
before the vertical sync is received on the VIP port or the entire frame will be dropped. As with all write
clients the VIP channels can be shadowed so the next frame/field descriptor can be loaded while the
previous frame is running without stalling the list.

1.2.13.5.1.1.1 Multiplexed Data Streams

In the case of a multiplexed data stream input the channels that should be used are
VIPX_PORTY_MULT_SRCZ. Where X is the specific VIP port that wants to be used and port Y is the port
A or port B that is receiving the data. Finally Z is the channel number. For Split line mux mode the LSB of
the channel will determine if the line is a split line or a complete line. This is required so that the data
streams do not get mixed when a channel ends without completing a line. In this mode the data will
always be sent out as 422 Interleaved data to the destination specified in the descriptor.

Содержание DM38x DaVinci





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DM38x DaVinci

Qomo TWP-1500 User Manual preview
TWP-1500
Бренд: Qomo Страницы: 62
TEFAL Mini Chopper 1510001553 Manual preview
Mini Chopper 1510001553
Бренд: TEFAL Страницы: 22
Crestron IntelliClass IC-300-CSP-P Quick Start Manual preview
IntelliClass IC-300-CSP-P
Бренд: Crestron Страницы: 2
Black & Decker FP1435 Instruction Manual preview
FP1435
Бренд: Black & Decker Страницы: 15
Black & Decker FP1450 Use And Care Book Manual preview
FP1450
Бренд: Black & Decker Страницы: 21
Black & Decker FP1335 Use And Care Book Manual preview
FP1335
Бренд: Black & Decker Страницы: 15
Black & Decker FP1550SDC Use And Care Book Manual preview
FP1550SDC
Бренд: Black & Decker Страницы: 17
Black & Decker FP5050SC Use And Care Book Manual preview
FP5050SC
Бренд: Black & Decker Страницы: 20
Black & Decker FP2510SKT Use And Care Book Manual preview
FP2510SKT
Бренд: Black & Decker Страницы: 23
Black & Decker FP1500 Use And Care Book Manual preview
FP1500
Бренд: Black & Decker Страницы: 19
Black & Decker FP550 Instruction Manual preview
FP550
Бренд: Black & Decker Страницы: 32
Black & Decker FP1610 Use And Care Book Manual preview
FP1610
Бренд: Black & Decker Страницы: 23
Black & Decker FP700 User Manual preview
FP700
Бренд: Black & Decker Страницы: 28
Black & Decker FP1510 Use And Care Manual preview
FP1510
Бренд: Black & Decker Страницы: 23
Black & Decker FP1600B Use And Care Book Manual preview
FP1600B
Бренд: Black & Decker Страницы: 24
Black & Decker FP6010 User Manual preview
FP6010
Бренд: Black & Decker Страницы: 68
Black & Decker FP2700SC Instruction Manual preview
FP2700SC
Бренд: Black & Decker Страницы: 11
Sony HCS-W80 Instructions preview
HCS-W80
Бренд: Sony Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды