sorin 75220 Скачать руководство пользователя страница 42

Страница: 42 / 304

System Description

3-4

20077/021 US

TRA

Operator’s Manual

Figure 3-5 Left: Disposable Tray on Tray Holders; Right: Waste Bag on Right-Side Hooks

Cart

The X

TRA

cart provides high storage capacity, allows maneuvering the unit, and simplifies its transport

(see Figure 3-6).

The cart is a dedicated separate element, fixed to the body of the machine by means of two spring
levers.

Figure 3-6 Cart

Maneuverability

The X

TRA

cart has four free-swiveling large diameter wheels to enhance maneuverability. A foot lever,

located on the front of the machine, controls the locked/unlocked state of the front wheels.

The back wheels have an independent brake pedal for each wheel.

The foot lever may be set in one of two positions:

• Up position: the front wheels are free to rotate and swivel.

• Down position: locks the front wheels to prevent both rotation and swivel.

The two back wheel pedals can be in the following positions:

• Up position: the corresponding wheel is free to rotate and swivel.

• Down position: the corresponding wheel is locked to prevent rotation and swivel.

Storage Capacity

The X

TRA

cart provides a high storage capacity. It has been designed to store the following elements:

• One 5 liter saline bag (or two 2 liter saline bags, or five 1 liter anticoagulant bags),

Содержание 75220

















































































































































































































































































































Результаты поиска

Содержание 75220

Отзывы:

sorin 75220, Руководство оператора, Страница: 42 / 304

Результаты поиска

Содержание 75220

Отзывы: