sorin 75220 Скачать руководство пользователя страница 211 | Manualshive

Страница: 211 / 304

sorin 75220 Скачать руководство пользователя страница 211

Data Download Option

X

TRA

Operator’s Manual

20077/021 US

11-5

Figure 11-5 Past Cases Screen

For a detailed explanation of the
Past Cases Screen, read “Past
Cases Screen” on page 5-52.

2.

From the Past Cases Screen, locate and select (touch) the case(s) you wish to view or export.
Scroll through the list of past cases by touching the arrow buttons to the right of the list.

Touching the “View Case” button with a single case selected will display the Tally tab of
the Menu screen with the tally table populated with data from the selected case.

Touching any of the output buttons (“Send to Printer”, “Send to X

TRA

USB”, or “Send to RS232”) will

export the data of the selected case(s) as described in the sections below. Only a single case may be
printed or viewed at the same time, but multiple cases may be selected for exporting via X

TRA

USB or

RS232.

Touching the Close button will exit the Past Cases Screen without selecting a past case to
view or export.

Re-opening Past Cases

It is possible to re-open a past case, which has been selected for viewing, for further
processing. To do so, touch the “Reopen Case” button from the Tally Tab of the Menu
Screen. The operator will be prompted for confirmation before the case is reopened.

Once the re-opening has been confirmed by the operator, the setup data of the original case will be
assumed as the setup data of the re-opened case, and all further processing and tally data will be
considered part of the re-opened case.

Selecting the Output Device for Data Download

Case data may be exported to several output destinations. Before sending case data from the End of
Case Screen or Tally tab of the Menu Screen, the operator must select the output destination using the
drop-down menu:

1.

Touch the arrow portion of the destination drop-down menu. The menu will then expand

displaying a list of available output destinations (see Figure 11-6). If necessary, the list may be
scrolled using the up and down arrow buttons which appear to the right of the list.

«
...
209
210
211
212
213
...
»

Содержание 75220

















































































































































































































































































































Отзывы:

Нет отзывов