sorin 75220 Скачать руководство пользователя страница 249

Страница: 249 / 304

Troubleshooting

TRA

Operator’s Manual

20077/021 US

14-17

Minimum wash
quality might be
already reached

Warning

Based on waste line color
indicator and supernatant
removal algorithm, the wash
quality might be already
acceptable.

• Press WASH to clear the

warning message and display
the wash screen.

• If the waste line is clear, you

may decide to anticipate the
Empty phase by pressing
EMPTY.

• Otherwise, the device will

continue to wash for the
entire preset wash volume.

Min. quality reached

Minimum wash
quality might be
already reached
(when processing
with Pfat protocol)

Warning

Based on waste line color
sensor and supernatant
removal algorithm, the wash
quality might be already
acceptable.

• Press WASH to clear the

warning message and display
the Wash screen.

• If the waste line is clear, you

may decide to anticipate the
Fat Removal phase by
pressing FAT REM.

• Otherwise, the device will

continue to wash for the
entire preset wash volume.

Min. quality reached

Minimum wash
quality might be not
reached yet

Warning

Based on waste line color
indicator and supernatant
removal algorithm, the wash
quality might not be yet
acceptable.

• Press WASH to clear the

warning message and display
the wash screen.

• If you want to manually skip

to the Empty phase, press
EMPTY.

• Otherwise, the device will

continue to wash for an
additional volume
corresponding to 50% of the
preset wash volume and
automatically switch to empty
if compliant.

Min. quality not reached

Message Text

Warning or

Alarm

Buttons Available in the

Button Bar During

Warning/Alarm

Operator Response

Data Management

Text

Table 14-2 List of Warnings and Alarms Which Might Occur During Processing (Continued)

Содержание 75220

















































































































































































































































































































Результаты поиска

Содержание 75220

Отзывы:

sorin 75220, Руководство оператора, Страница: 249 / 304

Результаты поиска

Содержание 75220

Отзывы: