sorin 75220, Руководство оператора, Страница: 174 / 304

Programmability Option
9-6
20077/021 US
X
TRA
Operator’s Manual
Renaming a Protocol
Follow these steps to rename an existing custom protocol. Note that the factory protocols cannot be
renamed.
1. Select the protocol you wish to rename from the protocol drop-down menu.
2. Touch the Rename button to rename the newly created protocol to a more useful name.
Touching the Rename button will display the Keyboard Screen (see Figure 9-1).
3. Using the controls on the Keyboard Screen, type in the new name for the protocol.
When satisfied with the name as entered, touch the Enter button to save the new name and
return to the Protocol/Mode tab. The text entered from the Keyboard Screen will be appended to
the base protocol’s name to create the new protocol’s name.
Touching the Close button will close the Keyboard Screen without renaming the protocol.
Custom protocol names are prefixed with the name of their base factory protocol. For example, a
custom protocol created with a base of the Pstd factory protocol and named “user1” at the Keyboard
Screen will have a final name of “Pstd_user1”. The prefix cannot be removed or renamed during the
lifetime of the protocol.
Changing the Wakeup Protocol
The wakeup protocol is the protocol which is set as the initially active protocol every time a new case
is started after loading the pump loop.
Only one protocol per bowl size may be designated as a wakeup protocol. Designating a new protocol
will automatically cause the previous wakeup protocol to lose its designation. It is possible to have no
protocol designated as the wakeup protocol. In that case, the protocol last active with the latest bowl
used when the X
TRA
system was powered down will be used as the wakeup protocol.
The currently designated wakeup protocol is indicated by a clock symbol to the right of its name
in the protocol drop-down menu in the Protocol/Mode tab of the Menu Screen.
Follow these steps to change the designated wakeup protocol:
1. From the protocol drop-down menu, select the protocol you wish to use for give wakeup
status.
2. Touch the Wakeup button to toggle the wakeup state of the selected protocol. The clock
icon will appear or disappear to the right of the protocol’s name, indicating its current state. (To
have no wakeup protocol, select the protocol with a clock and toggle it so there is no clock
symbol.)
Deleting a Protocol
Follow these steps to delete an existing custom protocol. Note that the factory protocols cannot be
deleted.
1. From the protocol drop-down menu, select the protocol you wish to delete.
2. Touch the Delete button to delete the selected protocol. It is deleted immediately without
confirmation and removed from the protocol drop-down menu.
Deleting the wakeup protocol causes there to be no designated wakeup protocol (and the last used
protocol will be used as the wakeup protocol).