sorin 75220, Руководство оператора, Страница: 115 / 304

Processing
X
TRA
Operator’s Manual
20077/021 US
5-33
Figure 5-31 Wash Phase in Manual Mode
Figure 5-32 Empty Phase in Manual Mode
Two options are available when processing with ATS protocols in manual mode to aid the operator and
allowing for a fully manual to a semi-automatic mode of operation:
• RBC Detector - detects the end of the Fill phase and alerts the operator.
• Wash-Empty function - automatically switches to the Empty phase when the desired volume of
saline solution has been moved into the bowl.
These functions may be enabled and disabled from the “Protocol/Mode” tab of the Menu Screen. Refer
to “Selecting the Active Protocol and Operating Mode” on page 5-34.
The RBC detector and Wash-Empty functions are enabled by default for the ATS protocols (in which
respect the system acts more like it is in a semi-automatic mode):
• When the end of the Fill phase is detected, the system will stop the pump and prompt the
operator to continue with the Fill phase (by touching the Play button) or advance to the next
phase (by touching the Wash button).
• When the end of the Wash phase is detected, the system automatically advances to the Empty
phase.
Disabling the RBC detector and/or Wash-Empty function will achieve something closer to a purely
manual operating mode:
• If the RBC detector is disabled, then the system doesn’t detect the end of the Fill phase. In that
case, the Fill phase continues until the operator intervenes or the reservoir becomes empty.
As a reminder to the operator, the message area will display the text “RBC detector disabled.” in
the Ready Screen and the text “RBC detector disabled. Press Wash manually.” during the Fill
phase while the RBC detector is disabled. Also, the triangle warning icon (
) will be displayed in
the status area.