sorin 75220, Руководство оператора, Страница: 118 / 304

Processing
5-36
20077/021 US
X
TRA
Operator’s Manual
Touch Screen User Interface
The following section offers a detailed description of the user interface. The figures in this section are
based on typical screens encountered during normal use in Automatic or 1 Touch modes. The actual
presence, visibility, and content of the displets and button bar depend on the configuration of the X
TRA
system.
Buttons and other interface elements which appear in multiple screens with the same function are only
labeled and described under the first screen in which they appear in this section.
Alarms Disabled Confirmation Screen
If no errors are detected during the power-up self-test, the operator will be prompted to check and
confirm any disabled warnings or changes to default acoustic signals (see Figure 5-34).
If all warnings are enabled and no changes to the acoustic signals exist, then the Alarms Disabled
Confirmation Screen is not displayed and operation continues directly to the Setup Screen (see “Setup
Screen” on page 5-37).
Figure 5-34 Example Alarms Disabled Confirmation Screen
Touching the Play button on the Alarms Disabled Confirmation Screen will accept the status of
the disabled alarms, warnings, and acoustic signals, and will display the Setup Screen (see
“Setup Screen” on page 5-37).
To change the status of alarms and warnings, use the “Warnings” tab of the Configuration Mode
Screen (refer to “Warnings Tab” on page 8-8).